Details
Bar counter mod. "Start Up" Wood L2000 H1150 Dimensions W200xD230xH95,1 cm, 2 doors refrigerated, 1 neutral zone with intermediate shelf 50 cm, onboard engine central with total floor tray in bent glass and tempered. Back Counter composed of 1 sink diameter 42 cm, zone from 100 cm 2 neutral doors to left, zone a day from 100 cm (for glasswashers or producer of ice)
Start up General Description:
BENCH BAR
1. Steel tubular supporting structure version wood in the oven at 180°C with epoxy powders, to guarantee the duration in time, with stiffening elements and adjustable feet for the perfect levelling of the furnishings.
2. Cell with ventilated refrigeration, to ensure greater performance and uniformity of the temperature inside the refrigerated compartment. The outer coating of the cell, including doors and drawers (optional), in prepainted sheet of white color. Operating temperature +4°C/+8°C. Test at 32°C with 60% R.H.
3. Onboard engine placed in the appropriate technical compartment protected from gray aeration prepainted sheet white. The refrigeration system is constituted by the hermetic compressor, condenser with copper tube and fins of aluminum air-cooled with fan, evaporator with copper tube and fins of aluminum supplied to capillary. Ventilated refrigeration with uniform distribution of air through a suitable conveyor located above the evaporator.
4. Electronic control panel with General button for the management of the refrigerant system of the cell, and second button for the management of refrigeration of drop-in "A-Plus"
5. Work Plan in water repellent postforming white low formaldehyde emission.
6. Side in metal, thickness 3 mm, white painted in oven at 180°C with epoxy powders, fixed with 4 screws inserted inside stainless steel ferrules diameter 20 mm, thickness 7 mm.
REAR DESK
1. Steel tubular supporting structure version wood in the oven at 180°C with epoxy powders, to guarantee the duration in time, with stiffening elements and adjustable feet for the perfect levelling of the furnishings.
2. Backrest in prepainted sheet white.
3. Doors in ennobled black low formaldehyde emission.
4. Work Plan in water repellent postforming white low formaldehyde emission.
5. Hole for coffee machine with protection collar in stainless steel.
6. Sink in polished stainless steel diameter 420 mm.
7. Mixer with lever with the dual flow for saving water.
8. Profile in extruded aluminum white painted in oven at 180°C with epoxy powders.
9. The shaft a day 1000 - H 690 - P 600 mm for the insertion of the lava flow cups with tub of protecting the bottom of aluminum.
10. Drawer beat filter in stainless steel polished finish.
11. Side in metal, thickness 3 mm, black painted in oven at 180°C with epoxy powders, fixed with 4 screws inserted inside stainless steel ferrules diameter 20 mm, thickness 7 mm.
12. The footboard with hydrophobic backing and plastic-coated in black color.
13. Sides terminals in metal, thickness 3 mm, black painted in oven at 180°C with epoxy powders.
Technical Data
2 refrigerated doors
1 neutral with shelf from W50 cm
engine on board
total counter top in bent and tempered glass
Sink with tub diameter 42 cm
neutral zone with 2 doors W100 cm
compartment a day W100 cm
Dimensions
W200xD230xH115 cm
Additional Information
| Tempi di consegna | Approximately 3 weeks from order |
|---|---|
| Garanzia | 3 years |
